“Let our rigorous testing and reviews be your guidelines to A/V equipment – not marketing slogans”
Facebook Youtube Twitter instagram pinterest

eD Considers WAF

by September 30, 2009
Hey, that sub isnt black?!?

Hey, that sub isn't black?!?

Elemental Designs (eD), the company that has arguably caused more spousal conflicts than any other single online subwoofer manufacturer has finally decided to give their customers finish options over the standard black. 

eD has long been known for low priced but HUGE subwoofers. If you are looking for bass, eD is a one stop shop. Unfortunately, they have also be fairly "bachelor-centric" has their subs are often very, very large, hard to place, and only come in black. Lately, they have been innovating their sub designs by providing subs with smaller footprints (tall instead of deep) and much smaller sub offerings. According to their blog, they are now taking the next step and offering real wood veneers to some of their subs.

eD has been a pioneer when it comes to building greener subs. While they pollute, it's the good kind (noise) and not the bad kind (harmful chemicals). Instead of using MDF which is pretty much standard for every other speaker manufacturer on the planet, they have switched to EFS (stands for Environmentally Friendly Substrate). According to eD:

EFS is created using a different process than MDF, and it does not contain urea-formaldehyde which is the bonding agent used as MDF is baked into the panels commonly used in construction. Without using urea-formaldehyde EFS is also a safer material for us to work with as well; because it does not emit the fumes while we are building enclosures. EFS is also built using whole wood logs (these are logs not suitable for construction in raw form), wood chips, and sawmill waste. The differences in the process add some interesting attributes to EFS; it actually ends up having a higher density than MDF as well.

The exact veneers that will be offered and on which models has not been announced as of this writing but check out the eD website on October 1st 2009 for specifics. According to eD, they will be offering a clear coat water-based finish on the veneer that will be hand applied at their factory in Iowa. Custom cabinets and veneers will likely be supported. Expect to pay a premium over the standard black finish for the veneer and a premium over that for custom. The sub in the picture is the A3-300 in a birch veneer that was flat (instead of rolled) cut. The finish is the satin water-based poly that you can expect from future offerings. Birch is unlikely to be one of the standard finishes. For more information please visit the eD blog.

About the author:
author portrait

As Associate Editor at Audioholics, Tom promises to the best of his ability to give each review the same amount of attention, consideration, and thoughtfulness as possible and keep his writings free from undue bias and preconceptions. Any indication, either internally or from another, that bias has entered into his review will be immediately investigated. Substantiation of mistakes or bias will be immediately corrected regardless of personal stake, feelings, or ego.

View full profile