Skip to content. Skip to navigation
You are here: Home Pro Reviews A/V Receivers Marantz SR6004 Dolby TrueHD & PLIIz / dts-HD AV Receiver Review
 

Marantz SR6004 Dolby TrueHD & PLIIz / dts-HD AV Receiver Review

by Gene DellaSala last modified June 11, 2010

Summary

  • Product Name: Marantz SR6004 A/V Receiver
  • Manufacturer: Marantz Electronics
  • Performance Rating: StarStarStarStarhalf-star
  • Value Rating: StarStarStarStar
  • Review Date: June 10, 2010 18:30
  • MSRP: $ 1249
Specifications
  • RX101 Bluetooth/IR Receiver included
  • Front USB audio input for iPod/iPhone digital connection or USB Memory
  • Dolby TrueHD/Pro Logic IIz, dts-HD Master Audio Decoder
  • Audyssey Dynamic EQ, Dynamic Volume and MultEQ Auto Calibration
  • Sophisticated aluminum/reinforced resin front panel with Front door design for Clean Panel
  • HDMI (v1.3) Repeating: Four Inputs, Two Outputs
  • Graphical User Interface (GUI) for Setup
  • GUI through HDMI out
  • 110 watts x 7 (8 ohms)
  • Analog, Digital Independent PWBs design to minimize mutual interference
  • Component Video output for 2nd Zone
  • Marantz Custom High Quality Block Capacitor
  • Full 10-bit Video Processing
  • M-DAX(Marantz Dynamic Audio eXpander)
  • 2nd Zone Analog audio output (Individual source) w/discrete command
  • 3rd Zone Digital audio output (for Digital input source)
  • SIRIUS & XM Ready with discrete IR commands
  • Bi-Amp Drive Capability for Front L/R
  • RS-232C, DC Trigger out, Flasher In and Marantz D-BUS (RC-5) In/Out
  • LCD Learning Backlight system remote
  • Available Option Rack Mount Kit RMK6504SR
  • Dimensions: 17-3/8" W x 6-3/8" H x 15-3/8" D
  • Weight: 28 lbs

Pros

  • Excellent sound quality
  • Easy to setup and operate (main zone)
  • Compact and attractive design

Cons

  • Confusing multi zone operation
  • Mediocre HDMI video upconversion
  • No networking

Introduction

If you're looking for a midpriced receiver with respectable power reserves and audio performance, the Marantz SR6004 is a top contender. It will deliver faithful audio reproduction to all but the most elaborate theater systems. I found myself enjoying extensive music listening sessions on the SR6004 which I usually shy away from if I am not happy with the fidelity of a product under review. Based on my findings, I would say that Marantz struck a good balance with the SR6004 and lived up to its strong audio heritage. Good sound quality and looks are the two key selling points of this product which should appeal to any serious audiophile not able to commit to the expense and space constraints of full fledged separate components. Recommended!

 

 

Recent Forum Posts:

Post Reply
chadfs posts on June 16, 2010 20:41
The Blue tooth didn't work well with my i touch either. However it works great with my Samsung phone so I blame Apple not Marantz.
Lee Bailey posts on June 15, 2010 23:26
Even though the unit will not enable Audyssey when playing any of the HD bitstreams, you can send LPCM from the source unit instead, and Audyssey processing will be available to you.
Seth=L posts on June 13, 2010 21:06
gene;725348
Heat sinks are pretty generic parts. The same heatsink is likely used on many different brands and model#s of A/V receivers. Marantz and Sherwood receivers are not shared platforms as far as I can see.
You may be right. However, it is known that Sherwood builds Denon's lower end receivers to Denon's specification. Being that both companies fall under the same umbrella it's not outside the realm of possibility that Marantz receivers could be made in part or whole by Sherwood completely to Marantz's specifications. This says nothing about the quality of the end product as Sherwood has made a name for itself in the production of quality OEMs and spec'd builds. IMO, if the Marantz receivers are made by Sherwood it's a cost effective route to take.
bellevegasj posts on June 13, 2010 20:07
I wish these shared the same video upscaling as the upper Denon line. I would jump on this for sure if they did. I use this feature.
gene posts on June 13, 2010 11:33
Marantz seems to have made some modifications to the heatsink, although it mostly looks like a typical Sherwood heatsink. If this receiver is made by Sherwood, it was definitely made to Marantz's exact specifications. That is a bold beautiful machine.


Heat sinks are pretty generic parts. The same heatsink is likely used on many different brands and model#s of A/V receivers. Marantz and Sherwood receivers are not shared platforms as far as I can see.
Post Reply
 
Join our Newsletter for News & Deals