RTcom HS-88M HDMI Matrix Router
- Product Name: HS-88M HDMI Matrix Router
- Manufacturer: RTcom USA
- Review Date: January 08, 2009 10:25
- MSRP: $7,499
- First Impression: Pretty Cool
- A lot of switching mode: Any 8 x 8 select switching, single input to multi-output
- Various User Interface Using RS-232C, IR Remote Control and LAN, Front Keys
- HDCP Compliant at all output channels
- Compliant to HDMI V1.3, Use Silicon Image's HDMI V1.3 chips
- Built in external EDID read function - HS-88M has EEPROM to save EDID data from the display and supports any HDTV with maximum resolutions. It supports even non-VESA (Video Electronics Standards Association) resolution including projectors with unique resolution. User can select factory pre-programmed EDID data or use external EDID data simply.
- Built noise protection circuit in each input and output ports
- Exhibition video display system
- Control of Home Theater system
- Supports Bandwidth: 25-225MHz
- Supports Resolution: HDTV Signal up to 1080p@60Hz and 2048x1080@60Hz, 2k
- Input Channel : HDMI type A female x 8 Channels
- Output Channel : HDMI type A female x 8 Channels
- HDCP Compliant
- Power Supply : DC 12V, 4.0A
- Power Consumption : 30W
RTcom USA showed off the new the HS-88M high-definition multimedia interface (HDMI) Matrix Router. This is an 8x8 matrix routing switcher that can simultaneously route any of 8 HDMI inputs to 8 outputs. This makes it one of the industry's first fully digital routing matrix switchers. Add to that the fact that it's only a couple of rack spaces tall and you've got a nicely compact product sufficient for switching HDTV in the finest of palatial mansions. Bill Gates probably has 3 of these in his dining room. At $7,499 this isn't exactly a "consumer" electronics product so much as it is a brilliant solution for truly high-end whole home applications. Of course, with HDMI being so difficult over long runs, installers will want to pair this with some solid fiber optic solutions to get from point A to point B.
The HS-88M set itself apart from other products in the Video Switching Distribution category in that it is actually the industry’s first HDMI matrix router with eight in/eight out ports. It can be controlled by RS-232C, LAN (TCP/IP), Infrared or front panel keys, making it extremely flexible in terms of how it is addressed within home control systems.
With the HS-88M, HDMI signals can be routed from any source: computers, cable/satellite set top boxes, Blu-ray players, whatever – and can be sent simultaneously to eight different displays or A/V receivers without degradation in signals. Audio and video. The HS-88M is compliant with HDMI version 1.3 and supports resolutions up to 1080p@60Hz with 36-bit color depth (Deep Color), Dolby TrueHD, and DTS-HD. The HS-88M has an EEPROM to save EDID data from the display and supports any HDTV with maximum resolutions. It even supports non-VESA (Video Electronics Standards Association) resolution including projectors with unique resolution. User can select factory pre-programmed EDID data or use external display’s EDID data simply. The HS-88M also features full High-bandwidth Digital Content Protection (HDCP) compatibility, alleviating the problem of HDCP encoding, which previously blocked signals from being transmitted from audio-visual products to multiple displays.
The HS-88M Matrix Router is currently available at an MSRP of $7,499.00. To purchase the products customers in U.S. may contact Aurora Multimedia at (732) 591-5800 or email@example.com and international customers may contact RTcom USA at (973) 383-4878 or firstname.lastname@example.org. I'll be ordering three for my patio. For more info check out www.digitalextender.com.