AV Rant Techcast #1: Denon Interview
AVRANT
In my first tech podcast, I interviewed Denon’s own Director of Product
Development, Jeff Talmadge, to discuss the new super AVP-A1HDCI pre/pro and
POA-A1HDCI 10CH power amplifier. We discuss these products in great detail
including what upgrades are to come for them and what lies ahead in the Denon
product roadmap. We also discuss Denon’s plan to unveil a truly universal DVD
Player that also supports Blu-ray (but not HD DVD). In this podcast, you will also discover how their new $500
esoteric D.Link cable releases magical audio pixies to ensure you get the most
out of these upper echelon products. This interview is chock full of great Denon info so you won't want to miss it!
See also:
Recent Forum Posts:
Post Reply
Lordoftherings posts on October 28, 2009 01:20
gene;640161
I really like the sound of the RBH T30s run full range, explosive articulate bass.
**************************
HAPPY BIRTHDAY GENE!
**************************
Franin posts on October 27, 2009 19:26
gene;640161
Kinda. I grouped 2 of my subs to sub 1 and 2 of my subs to sub 2 and ran Audyssey. I got good results. I plan on running my towers fullrange next instead of treating the bass portions as dedicated subs to see how far I can take it. I really like the sound of the RBH T30s run full range, explosive articulate bass.
Would you say that's a better way than mix ? I was told there was delay issues doing it that way but could not see how.
gene posts on October 27, 2009 13:14
Kinda. I grouped 2 of my subs to sub 1 and 2 of my subs to sub 2 and ran Audyssey. I got good results. I plan on running my towers fullrange next instead of treating the bass portions as dedicated subs to see how far I can take it. I really like the sound of the RBH T30s run full range, explosive articulate bass.
Franin posts on October 24, 2009 05:51
Franin;623741gene;605648Hi Gene did you end up trying it that way??
- simultaneous Audyssey calibration of all 3 sub channels (its usually preferable and beneficial to apply one correction curve to all subs)
You know you can do that. The way I do it with two is:
Assign:
Sub 1 = sub 1
sub 2 = sub 1
so you assign sub 2 as sub 1 also and they both run lfe simutanoesly. I run my system as 7.1 but have 2 subs and coming on the same time.
If you want to run a third all you have to do is :
Sub 3 = Sub 1 also.
Laurent B. posts on October 18, 2009 02:42
Hi there,
A long time ago (june 2008), we listed firmware issues of AVP-A1HD and AVC-A1HD (link to the discussion [forums.audioholics.com]). Then Gene submitted them to Denon.
Some issues have been solved, but some are still here, more than 1 year later!
One of them is :
I made a video that explains the issue : it is here : http://www.youtube.com/watch?v=Za6hRPKwz3g [youtube.com]
I have contacted Denon France 2 weeks ago about this issue, unfortunately they havrn’t replied to my email.
May anybody here could contact Denon USA and link them the video?
Thank you very very much.
Denony
A long time ago (june 2008), we listed firmware issues of AVP-A1HD and AVC-A1HD (link to the discussion [forums.audioholics.com]). Then Gene submitted them to Denon.
Some issues have been solved, but some are still here, more than 1 year later!
One of them is :
Receiver continues to display album art image with screen saver turned on and active.
I made a video that explains the issue : it is here : http://www.youtube.com/watch?v=Za6hRPKwz3g [youtube.com]
I have contacted Denon France 2 weeks ago about this issue, unfortunately they havrn’t replied to my email.
May anybody here could contact Denon USA and link them the video?
Thank you very very much.
Denony
Post Reply
